An Intensive 5-day Training Course
Process Measurement, Instrumentation & Control
INTRODUCTION
To control a process in real life, the efforts and skills of the engineer and technical staff should be grouped together. There are many alternative ways to control industrial processes. Moreover, there are enormous settings for the controller parameter. Therefore, a fundamental understanding of the principle of operation of a range of sensors/transducers and instrumentation techniques applicable in an industrial situation combined with an understanding and knowledge of process control techniques and tuning methods equips the engineer or technician with the necessary skills and makes them invaluable in their workplace.
In this EuroMaTech Process Measurement, Instrumentation & Control training course, Delegates will investigate the operating principles and concepts of instrumentation and measurement systems and will acquire the knowledge relating to the characteristics and properties of the variables being measured. Moreover, the delegate will gain an understanding of the Process control systems and methods used in a modern industrial system.
This EuroMaTech Process Measurement, Instrumentation & Control training course will highlight:
- Introduction to the principles and fundamentals of Process Measurement and Instrumentation systems and Process variables. Symbols and units used and sample calculations
- Principles of operation of Sensors and Transducers used for Temperature, Pressure, Flow and Level measurement
- Ultrasonic techniques for non-invasive process measurement
- Principles of Process Control and study of the main Control strategies used, leading to an explanation of the 3-term PID controller
- Explanation of a method used to ‘tune’ a PID controller
- Practical activities to design, build, calibrate and signal condition a typical sensor application
TRAINING OBJECTIVES
TRAINING OBJECTIVES
By attending this EuroMaTech Process Measurement, Instrumentation & Control training course, delegates will be able to:
- Have a solid understanding of the principles of operation of a range of sensors and transducers
- enable the delegate to investigate the operation of an instrumentation system through designing, building and testing typical sensor combined with appropriate signal conditioning circuits
- become familiar and confident with a range of measurement techniques
- understand the concepts of Process Control and acquire the knowledge relating to the characteristics and properties of a process variable being measured
- become familiar and knowledgeable with PID control and develop the ability to ‘tune’ a process control system using PID control
WHO SHOULD ATTEND?
This EuroMaTech Process Measurement, Instrumentation & Control training course is suitable for and is designed to attract and be of benefit to a range of people who work in the instrumentation and process plant area. Typically, but not exclusively this course will be of benefit to:
- Electronic Engineers and Technicians
- Chemical Engineers and Technicians
- Electrical Engineers and Technicians
- Instrumentation Technicians
- Installation and Maintenance Technicians
- Instrument and Process Control Technicians
- Instrument Fitters
- Maintenance Engineers
- Mechanical Engineers and Technicians
- Operations Engineers
- Process Technicians
- Production Professionals
- System Integrators
TRAINING METHODOLOGY
This EuroMaTech Process Measurement, Instrumentation & Control training course will combine presentations with interactive practical exercises, supported by video materials, activities and case studies.
TRAINING OUTLINE
Day 1 - Introduction to Process Control
- Why process basics
- The Process Control elements
- Sensors and Actuators
- Analog and Digital Signals
- Stability, steady state errors, response time concepts
- Types of controllers
Day 2 - Measurement of Process Physical Quantities / Variables
- Direct and indirect measurement
- Sensor fundamental attributes
- Temperature and its measurement devices
- Pressure and its measurement devices
- Flow and its measurement devices
- Level and its measurement devices
- Process analyzers
- Valves and other actuators
Day 3 - Control Loops and Algorithms
- Open loop control systems
- Closed loop control systems
- PID controllers
- Cascade control systems loops
- Feedforward control
- Ratio Control Loops
Day 4 - Tuning PID Controllers
- P action control and its advantage
- I action to control and its advantage
- D action control and its advantage
- Common methods for tuning PID controller
- Modeling and simulation of process control
Day 5 - Troubleshoot Process Control Systems
- Identifying faults that could happen within the Process control system
- Carrying out Fault Tree Analysis
- Abnormal Situation Management in Process Control
- Operator response and Alarm Management
- Failure modes and carrying out FMECA analysis
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
