An Intensive 5-day Training Course
Ultrasonic Testing (UT)
The Most Precise NDT Method
CLASSROOM DATES
INTRODUCTION
Ultrasonic Testing (UT) uses high frequency sound waves to conduct examinations and make measurements. Ultrasonic inspection can be used for flaw detection/evaluation, dimensional measurements, material characterization, and much more. Although there are a number of technologies employing ultrasound, the simplest explanation of what happens in this method is that sound energy is introduced via a transducer and propagates through the materials in the form of waves. When there is a discontinuity (such as a crack) in the wave path, part of the energy will be reflected back from the flaw surface. The reflected wave signal is transformed into an electrical signal by the transducer and is displayed or recorded in a variety of ways. Both surface and subsurface defects can be detected making ultrasonics a volumetric testing method. Applications vary in complexity from very small, hand-held manual units to very large, sophisticated automated systems. This method is used to inspect a variety of product forms including castings, forgings, and weldments. The structural steel, automotive, petrochemical, power generation, and aerospace industries are a few examples that utilize ultrasonic inspection.
TRAINING OBJECTIVES
- To explain the principles of Ultrasonic Testing
- To calibrate ultrasonic equipment and probes
- To measure the thickness of steel plates and determine levels of attenuation
- To locate and evaluate laminations and thickness measurements
- To identify suitability of UT for the material and inspection techniques
- To select the correct type of probe to examine welded butt joints in steel plate, pipe and aerospace components/structures
- To report on the location and size of defects in typical welded butt joints
- To interpret and evaluate the test result as per international applicable codes & standards
WHO SHOULD ATTEND?
- NDT Examiners
- Welding inspectors
- NDT Engineers
- Mechanical inspection Engineers
- Piping inspectors
TRAINING METHODOLOGY
This EuroMaTech Ultrasonic Testing (UT) training course will combine presentations with interactive practical exercises, supported by video materials, activities and case studies. >Check: Mechanical Engineering Training Courses
TRAINING SUMMARY
This EuroMaTech Ultrasonic Testing (UT) training course contains Level 1 and 2 material and covers the theories and practices involved with UT. Equipment, densitometers, code & procedure reference, types, forms, and methods are discussed.
TRAINING OUTLINE
Day 1 - Ultrasonic Testing (UT)
- Personnel Certification
- Wave Modes
- Ultrasonic Transducer and Sound Field
- UT Equipment
- UT TEST MODE
- Pulse-echo mode
- Pitch-catch mode
- Scan Plans and weld volume coverage
- Normal beam
Day 2 - Ultrasonic Testing (UT)
- Angle Beam
- IIW Blocks Type I and II
- Miniature Angle Beam
- Rompass Block
- Step Wedge
Day 3 - Ultrasonic Testing (UT)
- Area Amplitude Block
- Distance Amplitude Block
- Measurement of Beam Exit Point
- Measurement of Refracted Angle
- Range Calibration using IIW, Rompass
Day 4 - Ultrasonic Testing (UT) – Specific
- Angle Selection for Weld inspection
- Surface Distance, Skip Distance, Depth, ½ vee and full V Path
- Weld Inspection and plotting discontinuities like crack, lack of fusion, lack of penetration, slag, porosity in welds
- Distance Amplitude Correction (DAC) Curve
Day 5 - Ultrasonic Testing (UT) – Practical
- MODULE 14:
- ASME V
- ARTICLE 4
- WRITING AN ULTRASONIC PROCEDURE
- ASME Section V
- Essential Variables
- Non-Essential Variables
- MODULE 15: ASME V CODES AND STANDARDS
- ASME Section V, Article 4 Weld Examination
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
