An Intensive 5-day Training Course
Produced Water Management, Treatment & Reinjection
CLASSROOM DATES
INTRODUCTION
Produced water is a common fluid stream in exploration and production operations. It consists of formation water, or flood water previously injected into the formation. Generally, produced water may be reinjected after being treated. If the injected water contains solids large enough to plug in the formation, injectivity will decline. Downhole solids contributing to plugging may include not only the solids escaping filtration, but solids generated after water treatment (corrosion, scale, and bacterial products). Consequently, corrosion inhibition, scale inhibition, and bacterial control, as well as filtration, are required for optimizing the rate of water injection.
This EuroMaTech Produced Water Management, Treatment & Reinjection training course provides both theoretical and practical knowledge and skills highlighting:
- The latest technologies for treating injection and produced water in both onshore and offshore facilities.
- Detailed overview of produced water handling mechanisms and methods for its diagnosis, treatment, in oil & gas drilling facilities.
- Water management, reservoir requirements and discharge water quality monitoring.
- Microbial, chemical, physical and environmental produced water challenges and techniques used for their mitigation in order to help reduce investments, operation and maintenance costs.
TRAINING OBJECTIVES
This EuroMaTech Produced Water Management, Treatment & Reinjection training course aims to enable participants to achieve the following objectives:
- Understand how to reduce operation and maintenance costs by applying the most efficient produced water treatment techniques.
- Learn about injectivity and scale prevention in reservoirs.
- Gain understanding of water management in oil & gas production facilities.
- Understand how to improve produced water and injection water quality.
- Learn about the most efficient sampling and oil in water monitoring techniques.
- Gain updates on the latest environmental legislation and regulations.
- Learn how to efficiently remove sulphate and bacteria from injection water.
- Gain tips on how to cope with complex oilfield microbial challenges.
- Understand how to maintain sour gas and hydrogen sulfide production under control and mitigate the risk of corrosion.
- Learn about emulsion formation, mitigation and prevention techniques.
- Gain knowledge on produced water treatment for mature fields and subsea satellites.
WHO SHOULD ATTEND?
Plant and production engineers, chemists, and senior operations personnel are responsible for designing, operating, and maintaining facilities that process and manage produced water.
TRAINING METHODOLOGY
This EuroMaTech Produced Water Management, Treatment & Reinjection training course will be delivered by extensively interactive training methods, encouraging attendants to share their questions and experiences and apply the course material to real-life work case studies. The attendants will also be encouraged to raise more of their questions and to share developing the right answers using their analysis and experience. Course material through power point equipped with necessary animation, learning videos, and general discussion to provide participants with a full understanding concerning the subject course will be provided.
TRAINING SUMMARY
This EuroMaTech Produced Water Management, Treatment & Reinjection training course is designed as an effective practical shortcut to understand produced water chemistry, the main water contaminants, corrosion and bacterial problems, mineral scale formation, equipment and pipeline plugging, injection well and formation plugging, the method and operation of produced water treatment for reinjection, for either surface operation engineers or subsurface petroleum engineers, and anyone who involve in produced water handling, treatment, and related business activity.
TRAINING OUTLINE
PROGRAMME OUTLINE
Day 1 - Produced Water Chemistry and Characterization
- Water chemistry fundamentals
- Composition of produced water
- General impurities
- Water formed scales
- Stiff & Davis Saturation Index and LSI
- Injection water quality requirements
- Corrosion control
- Treatment overview
- Case Study
Day 2 - Oilfield Production Liquid Separation principles
- The Nature, Chemistry and Composition of oilfield fluids
- Test Methods for Oil and Water
- Emulsions / Stabilization, Destabilization
- Principles of Flotation
- Key Design Parameters of Flotation
- Henrys & Stokes Laws
- Workshop-Class Work Exercise
Day 3 - Produced Water Treatment
- Primary water treatment technologies - separators, hydrocyclones, and CPIs
- Secondary water treatment - induced gas flotation
- Tertiary water treatment technologies - media and membrane filtration
- Biological Water Treatment
- Chemicals and chemical treatment
- Diagnostic testing and in-field observations
- Case Studies
Day 4 - Corrosion & Water Treatment
- Filtration
- Dissolved Gas Removal
- Coagulation
- Chlorination
- Iron Removal
- Water Softening
- Silica Removal
- TDS Removal
- Case Studies
Day 5 - Produced Water Injection System
- How Does Water Injection Work
- Water injection and disposal systems - theory of operation
- Water injection pumps
- Water injection plants
- Limitations of Water Injection System in Oil Wells
- Troubleshooting
- Case Studies-Safety in oil & gas field produced water handling and treatment
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
