An Intensive 5-day Training Course
Advanced Well Integrity Management
Planning, Execution and Troubleshooting
CLASSROOM DATES
INTRODUCTION
The Well Integrity Forum (WIF) was established in 2007 and one of the main issues that were initially brought up for review was well-integrity training. WIF members acknowledge a need for well-integrity training of key personnel working with well integrity offshore and onshore.
This Advanced Well Integrity Management training course is designed to provide the participants with knowledge to deeply investigate the faultier and risk of well integrity. The participants have an excellent chance to share ideas and to correct the concept of well integrity management. This advanced training course will discuss the proper approach to decision-making to provide certainty within the organization.
The knowledge and skills to make critical decision throughout well life cycle is vital, not only for WIM purpose but as well as for economic value. This training course will focus on the Well Integrity management systems and interfaces with other teams in the organization. Integrity barriers are defined, Well Failure model and how to establish one is discussed, as well how to create an efficient well integrity organization.
The training course will deepen your knowledge of well integrity management, and develop the skills for designing, operating, and maintaining well equipment with the ultimate objective of ensuring a permanent, safe containment of all wellbore fluids.
This EuroMaTech training course will highlight:
- The Concept of Well Integrity
- Awareness of regional Standards and Regulations
- Different stages of well operations from Design and Construction, to Production Impact Well Integrity
- Risks associated with different types of well integrity issues
- Different techniques to reduce / mitigate risks
- Procedures, roles and responsibilities of personnel involved in the well lifecycle towards Well Integrity
- The focus on key areas of well integrity assurance
- The Production supervisor’s duties with regard to well integrity
TRAINING OBJECTIVES
This training course on Advanced Well Integrity Management aims to:
- Improve the delegates’ appreciation of the well design and annulus construction, i.e. the well as a “pressure vessel”.
- Provide knowledge & understanding of the guidelines and standards that when observed and implemented effectively will ensure well integrity.
- Establish an increased awareness of well integrity issues and how they are controlled / managed and by whom.
- Provide knowledge of how to maintain equipment for safe and effective operation.
WHO SHOULD ATTEND?
This EuroMaTech training course is suitable to a wide range of professionals but will greatly benefit:
- Affiliate Technical Directors
- Asset Manager
- Petroleum Engineers
- Production Technologists
- Production Personnel (Production Operators, Maintenance Supervisors)
- Drilling and Well Servicing Personnel (Drilling Manager, Drilling / Well Engineers, Completion and Well Service
- Engineers, Drilling Supervisors, Rig Manager, Toolpusher, Drillers
TRAINING METHODOLOGY
This training course will utilize a variety of proven adult learning techniques to ensure maximum understanding, comprehension and retention of the information presented. The daily workshops will be highly interactive and participative.
TRAINING SUMMARY
This Advanced Well Integrity Management training course creates measurable impact for both the organisation and the professionals it nominates to attend. For the organisation, it contributes to reducing overall well costs, preventing environmental pollution, extending well life, and reinforcing well integrity through better design decisions and more effective control of the factors that influence long-term performance. It also strengthens the organisation’s ability to minimise risk, manage well-related challenges proactively, and resolve operational problems through practical, logical, and cost-effective approaches. For participants, the course provides integrated and up-to-date knowledge in well integrity management, deepens technical understanding of sound well design practices, and builds the confidence required to apply these methods effectively in real operating environments. In addition, attendees gain valuable insight into the latest technologies for well inspection, monitoring, and problem control, enabling them to identify, prevent, and resolve issues that directly affect safety, performance, cost efficiency, and the sustained integrity of the well throughout its lifecycle.
TRAINING OUTLINE
Day 1 : Fundamentals of Well Integrity and Detection of Problems
- Definition of the Various Components of the Well and Showing the Integrity Barriers
- Designing Integrity in Wells-Completion Design
- Well Completion Components
- Well Head Construction Steps
- Influences on Well Integrity and Why It Needs Managing
- Preventive Maintenance Reduces Operating Cost and Optimizes Production
- Maintenance Processes and Differences
- External Well Integrity Tests
- Internal Well Integrity Tests
- Ways of Losing Well Integrity
Day 2 : How to Prevent Catastrophic Failure of a Well caused by External and Internal Corrosion
- Technology & Tools for Internal Well Integrity Diagnostic & Monitoring
- PLT Logging Techniques
- Securing Internal Integrity, Leak Detection etc.
- Establishes Tubing Base Line Wall Thickness and Corrosion Over Life Cycle of the Well
- Non-intervention Less Investigations like Pressure Testing
- Detects Leaks (Noise logging, temperature logging, etc.)
- Production Profile Analysis
- Risk to the Completion String from Internal Sources
- Barrier Understanding
- The Management of Barrier Testing
- Discuss Testing Methods of the Barriers in the Well
- Referring to the Barriers Discussed Above - make a plan to test and verify the barriers
Day 3 : Consequences of Loss of Integrity of One Well to its Surrounding Wells and Potential Financial Exposure
- Monitor for and Understand Mechanical Integrity Problems Preventing Potential Production Rates
- Sand Removal
- Impact of Paraffin’s and Asphalten on Well Integrity
- Bacteria Types and Its Effect on Well Integrity
- How to treat these problems in a proper ways?
- How to Execute Scale Removal
- Cement Squeeze for Water and Gas Shut-off
- Evaluating Well Integrity, Annular Pressure Management
- Abandonment: Temporary and Permanent
Day 4 : Well Integrity & Barrier Philosophy and How Testing is Done
- Well Failure Model
- Leak Rate Determination Calculations
- Risk Based Well Integrity Management and Testing
- Failure Mode and Effects Analyses Diagram
- Show Barriers, Function and Its Severity In Case of Failure
- Discuss Testing and Managing the Data
- Provide Systems and Procedures, which Ensure that the Integrity of the Well is Assured
- Ensure that the Well is Maintained with Reference to Appropriate Procedures and Specifications
- Ensure that the Risks of Operating the Well are as low as Reasonably Practicable
- Basis for the Development of Asset-specific Well Maintenance and Integrity Standards, Policies, Procedures and Performance Targets
Day 5 : Optimize Well Completion to Optimize Well Integrity during the Lifespan of the Wells, based on Life Time and Possible Intervention Frequencies Assessments
- How to Build an Organization with Sufficient Well Integrity Competence and Capability
- Competent staff
- Well Failure Model
- Failure Modes and Effect Analyses
- Risk Based Well Maintenance
- Well Hand Over Form
- Well Head Check Sheet
- Wrap-up of the Class and Evaluation
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
FAQ
EuroMaTech provides a range of ISO certification and compliance training courses, including:
- ISO 9001 – Quality Management Systems Training
- ISO 45001 – Occupational Health & Safety Management Training
- ISO 14001 – Environmental Management Systems Training
These courses help organizations adopt internationally recognized standards and improve their overall performance.
To register for a training course, you can:
- Visit the EuroMaTech website, browse the available courses, and follow the online registration process.
- Contact EuroMaTech’s support team for assistance with course selection or inquiries about corporate training solutions.
EuroMaTech stands out as a leader in training and professional development due to:
- 30+ years of experience delivering high-impact training courses across industries.
- Accreditations from leading institutions, ensuring top-tier course quality and recognition.
- A portfolio of thousands of training courses, serving professionals at every level.
- A focus on innovation and future-ready learning models, including blended and digital training.
- Long-term partnerships with organizations globally, ensuring sustained success through talent development.
EuroMaTech has successfully delivered thousands of training courses, with thousands of professionals from over 50 countries attending annually.
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
