An Intensive 5-day Training Course
Penetrant Testing (PT)
Easy, Portable and Fast Detection Method
CLASSROOM DATES
INTRODUCTION
Penetrant Testing Inspection utilizes the property of capillary action to find surface breaking discontinuities in a variety of materials. It is one of the most economical Non-Destructive Testing (NDT) methods. A (penetrant) is applied to the surface of a test piece. Liquid Penetrant Inspection uses this capillary action to allow the penetrant to enter into fissures and voids that are open to the surface. After a dwelling time, the excess penetrant is removed, any remaining penetrant in the voids will flow back out exposing the indication. There are a variety of techniques included in liquid penetrant testing available depending on the type of Non-Destructive Testing (NDT) inspection and the kind of flaws a technician is aiming to find.
TRAINING OBJECTIVES
This EuroMaTech Penetrant Testing (PT) training course covers the principles of Liquid Penetrant Testing and prepares a candidate to:
- Select equipment to conduct test
- Setup test equipment
- Steps to conduct test
- Familiarize with codes and standards
- Interpret results with respect to applicable codes and standards
- Understand limitation of the test method
- Write test reports
WHO SHOULD ATTEND?
- NDT Examiners
- Welding inspectors
- NDT Engineers
- Mechanical inspection Engineers
- Piping inspectors
TRAINING METHODOLOGY
This EuroMaTech Penetrant Testing (PT) training course will combine presentations with interactive practical exercises, supported by video materials, activities, and case studies.
TRAINING SUMMARY
This EuroMaTech Penetrant Testing (PT) training course contains Level 1 and 2 material and covers the theories and practices involved with liquid penetrant inspection. Equipment, light meters, code & procedure reference, types, forms, and methods are discussed.
TRAINING OUTLINE
PROGRAMME OUTLINE
Day 1 - Dye penetrant test (PT)
- Purpose of Liquid Penetrant Testing
- Physical Principles
- Wetting Ability and Contact Angle
- Capillary Action
- Viscosity
- Reversed Capillary Action
- Types of Dye: Type I (Fluorescent) and Type II (Visible)
- Methods of Removal of excess Penetrant including Water Washable, Emulsifiers and Solvent Removable.
Day 2 - Dye penetrant test (PT)
- BASIC STEPS
- Method A - Water Washable
- Method B - Lipophilic Emulsifier
- Method C - Solvent Removable
- Method D - Hydrophilic Emulsifier
- Choice of Cleaning Method
- Different Cleaning Methods including
- Detergent
- Solvent
- Alkaline
- Steam
- Selection of Penetrant Materials
Day 3 - Dye penetrant test (PT)
- Application of Penetrant
- Standard Temperature Limits
- Dwell time
- Application of Developers
- Types of Developers
- Developing Time
Day 4 - Dye penetrant test (PT)
- Fluorescent Inspection
- Minimum intensity and light meter
- Visual Adaptation
- Visual Inspection
- Minimum light intensity and light meter
- Post Cleaning
- Limitation of Penetrant Testing
Day 5 - Dye penetrant test (PT)
- ASME Section V, Article 6
- ASME Section VIII, Appendix 8 (Accept/Reject Criteria) Standards
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
