An Intensive 5-day Training Course
Gas Turbine & Compressors
Optimizing Performane and Reliability in Gas Turbines and Compressors
CLASSROOM DATES
ONLINE DATES
INTRODUCTION
The Gas Turbine & Compressors Training Course provides an in-depth exploration of rotating equipment, with a strong focus on the operation, maintenance, and troubleshooting of gas turbines and compressors in industrial applications. From oil and gas to petrochemical and process industries, understanding the performance and reliability of these machines is critical for operational success.
This Gas Turbine Course offers participants a practical and theoretical understanding of centrifugal and positive-displacement compressors, pump systems, and turbine technologies. Through real-world applications, the course examines fluid dynamics, component functions, system optimization, and maintenance techniques.
Designed for professionals seeking to increase equipment uptime, improve efficiency, and reduce maintenance costs, the Gas Turbine Compressors Training Course delivers essential knowledge and practical tools for maximizing machinery performance.
Key areas covered in this Gas Turbine Training Course include:
- Fluid flow fundamentals and energy conversion principles
- Performance optimization of pumps, compressors, and turbines
- Troubleshooting and failure prevention techniques
- Maintenance practices that enhance reliability and extend equipment life
TRAINING OBJECTIVES
By the end of this Gas Turbine Compressors Training Course, participants will be able to:
- Understand key principles of fluid dynamics as applied to gas turbines and compressors
- Differentiate between centrifugal and positive-displacement pump and compressor systems
- Analyze performance characteristics and optimize equipment for efficiency
- Operate and maintain machinery within design parameters
- Identify components of various turbines and understand their operating behavior
- Apply troubleshooting methods to minimize recurring equipment failures
- Develop maintenance strategies that ensure long-term operational reliability
WHO SHOULD ATTEND?
This Gas Compressors Training Course is suitable for a wide range of professionals involved in the operation, maintenance, and performance optimization of rotating machinery, including:
- Technicians and Operators working in industrial plant settings
- Graduate Engineers and early-career professionals specializing in gas turbines and compressors
- Mechanical and Process Engineers involved in system efficiency and reliability
- Maintenance and Instrumentation Personnel managing equipment health
- Facility Engineers, Technologists, and Supervisors responsible for plant uptime
- Project Leaders and Team Managers evaluating or procuring rotating equipment
Anyone responsible for maintaining or optimizing the performance of pumps, compressors, or gas turbines will benefit from this hands-on and technically rich training.
TRAINING METHODOLOGY
The Gas Turbine & Compressors Training Course utilizes a workshop-style learning format to ensure high engagement and practical knowledge transfer. The methodology includes:
- Instructor-led presentations supported by real-world case studies
- Interactive computer simulations to demonstrate operational behaviors
- Video materials illustrating internal machinery operations
- Hands-on exercises applying troubleshooting and maintenance techniques
- Group discussions to facilitate experience sharing and peer learning
Participants will receive both hard and digital copies of the course materials for continued post-training reference.
TRAINING SUMMARY
The Gas Turbine & Compressors Course equips participants with the knowledge and skills necessary to ensure efficient and reliable operation of rotating equipment. Emphasizing real-world problem-solving, this course prepares attendees to reduce downtime, improve performance, and implement proactive maintenance systems.
Key takeaways include:
- Technical proficiency in operating and maintaining pumps, compressors, and gas turbines
- In-depth knowledge of system behavior and component interaction
- Practical skills for equipment diagnostics and root cause analysis
- Strategies for reducing maintenance costs and extending asset life
- Confidence in working with OEMs and specifying new or replacement equipment
Upon completion, participants will be empowered to enhance equipment performance and contribute significantly to operational excellence in their organizations.
TRAINING OUTLINE
Day 1: Introduction and Fluid Laws
- Introduction to basic types and principles of, Pumps, Compressors and Turbines
- Basic liquid and gas Laws
- Understanding Head
- Types of flow and losses
- Net Positive Suction Head (NPSH)
Day 2: Pumping Systems, Pump Performance and Pump Type Construction
- Pump type and Performance (Centrifugal and Positive Displacement)
- Pump characteristics. Head, Capacity, Power, Efficiency and Net Positive Suction Head (NPSH)
- Pump Curves and System Curves.
- Positive Displacement Pumps, Reciprocating and Rotary
- Dynamic Pumps Types, Centrifugal, Axial, Mixed, Multistage, etc.
- Sealing Systems. Conventional Packing Glands and Mechanical Seals
Day 3: Compressor Construction, Types, Characteristics and Performance
- Positive displacement compressors, reciprocating compressors, reciprocating compressors, diaphragm compressors.
- Rotary compressors, rotary screw compressor, lobe type air compressor, sliding vane compressors, liquid ring compressors
- Dynamic compressors, centrifugal compressors, axial compressors
- Principle of operation and performance curves
- Surging and choking problems
Day 4: Turbine Types, Construction and Performance
- Turbine Types
- Gas Turbines
- Steam turbines
- Turbine Operation
- Main components
- Nozzles
- Stator and Rotor Blades (Vanes) Configuration and Flow
- Aerofoil and Twisted Contours
- working cycle of a gas turbine, representation of the Pressure-Volume diagram (indicator card)
- Stages
Day 5: Troubleshooting & Maintenance
- Potential Failure Analysis
- Troubleshooting
- Review of common faults
- Developing a Preventive Maintenance Plan
- Vibration causes, forcing frequency causes, unbalance, misalignment, mechanical looseness, bearing defects, gear defects, oil whirl, blade or vane problems
- Cavitation
- Water Hammer
- What causes water hammer?
- Solutions for water hammer
- Review of the Week & Wrap-Up
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us info@euromatech.com
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at inhouse@euromatech.com
EuroMaTech has successfully delivered thousands of training courses, with thousands of professionals from over 50 countries attending annually.
EuroMaTech provides a range of ISO certification and compliance training courses, including:
- ISO 9001 – Quality Management Systems Training
- ISO 45001 – Occupational Health & Safety Management Training
- ISO 14001 – Environmental Management Systems Training
These courses help organizations adopt internationally recognized standards and improve their overall performance.
To register for a training course, you can:
- Visit the EuroMaTech website, browse the available courses, and follow the online registration process.
- Contact EuroMaTech’s support team for assistance with course selection or inquiries about corporate training solutions.
EuroMaTech stands out as a leader in training and professional development due to:
- 30+ years of experience delivering high-impact training courses across industries.
- Accreditations from leading institutions, ensuring top-tier course quality and recognition.
- A portfolio of thousands of training courses, serving professionals at every level.
- A focus on innovation and future-ready learning models, including blended and digital training.
- Long-term partnerships with organizations globally, ensuring sustained success through talent development.
