An Intensive 5-day Training Course
The 10-day Gas Metering & Station Design & Operation, and Instrumentation, Measurement & Control of Gas Compressors
INTRODUCTION
Gas metering is such an important facet in the modern world. There are so many hidden factors to consider. What is allowed? What is not allowed? What is best practice? What standard should be adhered to? The list seems endless.
This unique EuroMaTech training course on Gas metering and Station Design & Operation has been designed to guide the engineers and other personnel, tasked with this all-important function, in considering all the options and opportunities available to them. It has been structured to assist in the design and operation of natural gas metering facilities. The workshop looks at applicable standards, research, good practice, maintenance issues, design issues, etc.
Participants attending the Gas Metering and Station Design and Operation training course will develop the following competencies:
- A thorough understanding of options available for gas metering, and how the devices operate
- An ability to suggest the most appropriate measuring device for a specific application
- Consider associated equipment, instrumentation and devices that go with gas metering stations
- Understand flow computing, with respect to flow standards and flow conditions
TRAINING OBJECTIVES
EuroMaTech’s Gas Metering and Station Design and Operation training course aims to help participants to achieve the following objectives:
- Appreciate the most important gas measuring devices
- Make appropriate suggestions of the correct instrument for a specific application
- Take a gas metering station from the conception phase to a state of completeness and readiness
- Design, select and calibrate according to well established standards
- Ensure that all maintenance aspects have been considered and implemented correctly
TRAINING METHODOLOGY
The Gas Metering and Station Design and Operation training course will utilize well proven adult learning techniques, in order to ensure that maximum learning takes place. The focus will be on comprehension and information retention. This will include, but not be limited to, effective presentations, open discussions, simulations, paper exercises, individual and group exercises, and a computerised assessment of each chapter covered. Delegates will receive a comprehensive manual as well as a pdf version of the slides used. Questions are encouraged at all times.
TRAINING SUMMARY
This EuroMaTech training course covers critical areas of importance. Participants will acquire and develop essential skills, at the right time and at the right pace, based on building up a rock-solid foundation on Modern Gas Metering and Station Design and Operation.
TRAINING OUTLINE
Day 1 - Natural Gas Properties and Basic Fluid Laws
- Gas properties
- Thermodynamic state properties
- Transport properties
- Temperature and pressure measurement
- Bernoulli’s equation
- Friction losses
- Ideal gas and assorted gas laws
Day 2 - General Characteristics, Performance of Flow Meters & Differential Flow Measurement
- System characteristics
- Instrumentation signals
- Flow range
- Performance
- Sizing and calibration
- Selection criteria
- InstallatioOrifice
- Venuri
- Flow nozzles
- Pitot and averaging pitot
- AGA 3 standard
Day 3 - Positive Displacement and Turbine Measurement
- Rotating vane
- Oscillating piston
- Oval gear
- Helix meter
- Slippage
- Turbine meter
- Rotating paddle meter
- Erosion and corrosion
- AGA 7 standard
Day 4 - Ultrasonic and Coriolis Flow Measurement
- Time of flight
- Doppler
- Hybrid flow meters
- Usage and installation considerations
- AGA 8 standard
- Coriolis principles
- Coriolis performance
- AGA 11 standard
- Other forms of flow measurement (just for completeness)
Day 5 - Flow Measuring Systems and Other Considerations
- Meter runs
- Proving systems
- Time delays
- Quality systems
- Custody transfer
- Flow computers and communication
- Calculation routines
- Reporting procedures
- Pipeline and Regulatory Auditors
Day 6 - Introduction to the World of Quality Measuring Instruments, Measurement Accuracy and Quality Assurance
- Measurement standards
- Traceability of standards
- Quality assurance
- Response
- Systematic and other errors
- Factors influencing accuracy
- Probability and STD
- Control limits
- Statistical decision rules
- Reproducibility
Day 7 - Sampling & Conditioning, and Gas Chromatography
- Sampling and conditioning
- Analyser systems
- Analysis and sampling
- Process conditions
- Dead volume and phase diagrams
- Specific engineering issues
- Sample lag and sample recovery
- Sampling example
- Gas chromatography
- Retention factor and columns
- Band broadening
- Carrier gasses and peak selection
- Types of GC’s
- Advanced process GCs
Day 8 - Heating Value, Oxygen and Moisture Analysis and Spectroscopy
- Calorimetry
- Heating values
- Wobbe index and CARI
- Causes of oxygen in natural gas
- Oxygen measurement
- Combustion possible interferences
- Background gas interference
- Types of spectral absorption
- Spectral ranges
- Diffraction methods
- Assorted spectrometers
- Dealing with results
Day 9 - Process Control and Loop Tuning for Gas Processes
- Process control
- Feed back
- Feed forward
- Open vs closed loop
- The PID controller
- Open loop tuning
- Closed loop tuning
- Other methods of tuning
Day 10 - Measurement Uncertainty
10 – Measurement Uncertainty
- The need
- Statistical considerations
- Precision and bias
- Sensitivity
- Combined uncertainty
- Examples
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]