An Intensive 5-day Training Course
Process Engineering for Non-process Engineering Professionals
CLASSROOM DATES
INTRODUCTION
Process engineering (also referred to as chemical engineering) is at the heart of much of the chemical, oil, gas, and petrochemical industries. The process (chemical) engineer is interested in the transportation and transformation of solids, liquids and gases, but must also be familiar with many of the other engineering disciplines including mechanical, electrical and instrumentation. Of specific importance are separation processes including distillation, heat transfer, hydraulics and fluid flow, reaction engineering, but also process control and economics. These are the fundamental principles of process engineering.
This Process Engineering for Non-process Engineering Professionals training course considers the areas of process engineering that are most commonly encountered, and will provide an understanding of the fundamentals to the non-specialist, and a refresher to practising engineers, with examples that will be drawn from a range of process industries including oil and gas processing, petrochemicals, chemical manufacturing.
In this programme you will:
- Learn to interpret flowsheets and process flow diagrams
- Develop and understand mass and energy balances in process design
- Learn about fluid flow, pumps and compressors, and mixing
- Discuss heat transfer equipment and their design, including heat exchangers
- Understand distillation and separations used in oil and gas processing
- Discuss effluent minimisation and treatment
- Learn how to control processes
- Perform a basic economic analysis of a project
- Understand the safety and environmental responsibility on process engineers
TRAINING OBJECTIVES
Using case studies from the oil, gas and chemical industry to illustrate the material, participants attending the programme will:
- Learn to interpret flowsheets and process flow diagrams
- Understand the use of mass and energy balances in process design
- Gain a basic understanding of fluid flow, including pumping and mixing
- Study examples relevant to the oil and gas industry
- Design a heat exchanger and know advantages/disadvantages of different types
- Understand distillation and separations used in oil and gas processing
- Appreciate the need to control environmental pollution from industry
- Learn how to control processes
- Perform a basic economic analysis of a project
WHO SHOULD ATTEND?
- Practising or lapsed chemical engineers wanting to refresh their fundamental knowledge
-
All those working in the chemical, petrochemical, oil and process industries with a need to understand and discuss fundamental process engineering and technology issues with the process engineering specialists or other professionals
-
These will include geo-scientists, petroleum engineers, production engineers, trainee process engineers, R&D chemists, plant chemists, plant operators, EHS specialists and economists
- Case studies and examples will cover a range of levels, making the programme also suitable non-technical staff.
TRAINING METHODOLOGY
In addition to formal lectures. videos and discussions, the participants will learn by active participation through the use of problem-solving exercises, group discussions and analysis of real-life case studies.
TRAINING SUMMARY
This Process Engineering for Non-process Engineering Professionals training course identifies the areas of process engineering that are most commonly encountered and are fundamental to its understanding, enhancing process design and operation and enabling fruitful dialogue between the non-specialist and the engineer. Programme examples will be drawn from a range of process industries including the oil and gas processing, petrochemicals and chemical manufacturing industries.
TRAINING OUTLINE
Day 1 : Process Engineering Fundamentals
- Introduction
- Basic Concepts to remember
- Flow Diagrams
- Piping and Instrumentation Diagrams (P&IDs)
- Process Equipment
- Introduction to mass and energy balances
- Batch vs Continuous
- Risk Assessments and Hazard Studies
- Flammability and Electrical Area Classification
- Workshop Session
Day 2 : Fluid Flow
- Pressure and Head
- Bernoulli’s Theorem
- Flow of Liquids
- Reynolds number, pressure drop in pipes
- Compressible flow
- Introduction to Thermodynamics
- Principle of process relief devices and process design of relief systems
- Two-phase and Multi-phase Flow
- Pumps and Compressors
- Mixing and Mixers
- Workshop Session
Day 3 : Heat Transfer
- Thermal conductivity
- Conduction and convection
- Insulation
- Heat transfer coefficients
- Heat exchangers, type and sizing
- Chemical reactions
- Reaction kinetics
- Introduction to catalysis and Green Chemistry
- Workshop session
Day 4 : Introduction To Separation Processes
- Distillation basics
- Phase behaviour and vapour / liquid equilibria
- Distillation Equipment
- Distillation Troubleshooting
- Gas / Liquid separation
- Absorption and adsorption
- Solid Liquid separation
- Air and water pollution control
- Effluent treatment
- Workshop Session
Day 5 : Process Control & Economics Basics
- Measured variables
- Simple feedback control
- SIS and SIL
- Process Utilities
- Air
- Water and cooling water
- Steam
- Electricity and power generation
- Process Economics
- Preliminary economic analysis
- Fixed and variable costs, break even
- Calculating raw materials usage
- Scale up and six tenths rule
- Estimating the cost of process equipment and plants
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
