An Intensive 5-day Training Course
Electrical & Instrumentation Design, Installation & Operation
Types, Characteristics, Operation and Design of Common Electrical Instrumentation
CLASSROOM DATES
INTRODUCTION
This EuroMaTech training course in Electrical and Instrumentation Design, Installation & Operation is to create reliable systems for process plants. The process focuses on ensuring the accurate measurement often using instruments like temperature sensors, flow meters and pressure sensors. This information is essential including preparing drawings, P & ID datasheets and electrical wiring diagrams.
Installing and operating common electrical instrumentation, such as multimeters, ohmmeters, and clamp meters, requires strict adherence to safety protocols and manufacturer instructions. The exact procedures vary by instrument, but general guidelines cover proper planning, connection, and use. Inadequate electrical installation and validation can be far-reaching, potentially jeopardizing the integrity of research data, compromising the safety of personnel, and leading to costly downtime.
Effective network earthing systems ensures safety for the installation and personnel. Sustainable electrical power supplies are essential to provide continuity and presence of safe electricity to power the critical instrumentation.
Participants attending Electrical and Instrumentation Design, Installation & Operation training course will develop the following competencies:
- Identify the characteristics of the types of AC and DC power systems
- Understand the importance of electrical instrumentation validation
- Comprehend the effective earth systems
- Appreciate the modes of electrical protection and controls
- Incorporate the standby emergency supplies
TRAINING OBJECTIVES
This Electrical and Instrumentation Design, Installation & Operation training course aims to enable participants to achieve the following objectives:
- Understand the importance the electrical supply systems
- Comprehend the safety and performance of electrical instrumentation
- Ability to identify the effective network earthing system
- Appreciate the effects of protection relays
- Assess the importance secondary and standby electrical supplies
WHO SHOULD ATTEND?
This EuroMaTech Electrical and Instrumentation Design, Installation & Operation training course is suitable to a wide range of technical professionals but will greatly benefit:
- Electricians
- Electrical Supervisors
- Plant Electricians
- Operations & Maintenance Engineers, Supervisors & Technicians
- Maintenance Technicians
TRAINING METHODOLOGY
The EuroMaTech training course in Electrical and Instrumentation Design, Installation & Operation will combine presentations with interactive practical exercises, supported by video materials, activities and case studies. Delegates will be encouraged to participate actively in relating the principles of electrical instrumentation at their workplace.
TRAINING SUMMARY
This interactive Electrical and Instrumentation Design, Installation & Operation training course will create awareness to the delegates on the importance of a safe and secure electrical supply system and the roles of electrical instrumentation is the measuring and monitoring electrical quantities. >Check: Electrical & Instrumentation Training Courses
TRAINING OUTLINE
Day 1: Fundamentals and Characteristics of Electrical Systems
- Generation of Electricity Technologies Including Renewable Energy
- Alternating Current Generation Characteristics
- Transmission and Distribution of Electricity
- The Use of DC, Single Phase and Three-Phase AC Power Systems
- Single Line and Loop Diagrams of an Electrical Installation
- Resistance, Inductance, Capacitance, Power Factor and Harmonics
Day 2: Importance of Proper Electrical Installation and Significance of Electrical Validations
- Safety Considerations Related to Electrical Installation
- Design, Planning and Code Compliances
- Incorporating Protection and Overcurrent Devices
- Functional, Performance and Safety Testing of Electrical Instrumentation
- Characteristics of Flow Meter and Temperature Sensors
- Impact of Proper Electrical Installation and Validation
Day 3: Network Earthing TT and TN Characteristics and Merits
- Importance of Earthing
- Types of Earthing Systems and Clean Earth for Instrumentation
- Network Earth
- Earth Fault Path and Earth Resistance Measurement
- Safety Related to Touch and Step Voltages
- Earth Fault Mitigation Techniques
Day 4: Electrical Protection and Instrument Control
- Importance of Protection in Instrumentation, Control and Electrical Installation
- Protection Relays and Instrument Transformers
- Field Measurement of Physical Parameters (Flow, Pressure, Temperature, Density, Level, pH, Turbidity etc.) and Associated Control Devices
- Programmable Electronic Systems (PLC, DCS, SIS, SCADA, EID)
- Power System Protection and Co-Ordination
- Hazardous Area Classification
Day 5: Reliability and Security of Electrical and Control Systems
- Sustainable Electrical Systems Standby, Black Start, Back-Up and Emergency
- The Modern Uninterruptible Power Supply
- Standby Diesel Generators
- Redundancy in Power Supplies, Distribution Networks, Communication and Control Networks and Safety Systems
- System Security, Including Denial of Service and Sabotage from External Sources
- Wrap-Up Session
CALL ME BACK
Do you wish for us to conduct this course at your premises?
Discover In-House Solutions
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
EuroMaTech provides a range of ISO certification and compliance training courses, including:
- ISO 9001 – Quality Management Systems Training
- ISO 45001 – Occupational Health & Safety Management Training
- ISO 14001 – Environmental Management Systems Training
These courses help organizations adopt internationally recognized standards and improve their overall performance.
To register for a training course, you can:
- Visit the EuroMaTech website, browse the available courses, and follow the online registration process.
- Contact EuroMaTech’s support team for assistance with course selection or inquiries about corporate training solutions.
EuroMaTech stands out as a leader in training and professional development due to:
- 30+ years of experience delivering high-impact training courses across industries.
- Accreditations from leading institutions, ensuring top-tier course quality and recognition.
- A portfolio of thousands of training courses, serving professionals at every level.
- A focus on innovation and future-ready learning models, including blended and digital training.
- Long-term partnerships with organizations globally, ensuring sustained success through talent development.
EuroMaTech has successfully delivered thousands of training courses, with thousands of professionals from over 50 countries attending annually.
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
