An Intensive 5-day Training Course
Private: Screw Gas Compressors and Dry Gas Seals Application:
Design, Construction, Control and Operation
INTRODUCTION
Screw compressors are designed to cope with extreme process gas conditions that require robust and reliable operating conditions. They are successfully applied in chemical and petrochemical industry, refineries and oilfields, as well as in cryogenic and other branches of process industry. They operate successfully as dry or lubricated (oil flooded) compressors.
Dry gas seals are considered as the most favourable type of seals in many gas compressor applications. Their simplicity to operate and to be maintained with low operating cost and long operating life, make them advantageous compared to the other types of seals.
This programme will introduce the participants to the practical aspects of operation and maintenance and troubleshooting of screw compressors and associated equipment. The programme will also cover important elements of dry gas seals, i.e. their design, selection and operation. Examples selected from the real life industrial practice will help delegates in solidifying their knowledge gained throughout the programme.
Key highlights of this programme are:
- Improvement of practical skills in operation of screw compressors
- Understanding of the difference between dry or oil flooded compressors
- Knowledge of vibration control of screw compressors
- Application of adequate procedure for dry-gas-seal maintenance
- Role of the root cause analysis in preventing failures in operation
TRAINING OBJECTIVES
- To familiarize with the main design features of screw compressors
- To introduce the best practices for efficient operation and control
- To understand the issues related to lubrication and cooling
- To explain the procedures for proper alignment and rotor balancing
- To understand the challenges associated with handling difficult gases in industry
- To emphasise advantages of dry gas seals for various types of compressors
- To overview the best practices for operation and maintenance of dry gas seals
WHO SHOULD ATTEND?
WHO SHOULD ATTEND?
- Plant engineers, technicians and operators from chemical, petrochemical and process industries, oil refineries and gas production
- Project engineers and operation supervisors and managers
- Personnel dealing with compressed gas system optimization and retrofitting
- Engineers involved in control measurements and performance testing
- Technical service personnel involved in maintenance, repair and troubleshooting
TRAINING METHODOLOGY
TRAINING METHODOLOGY
The seminar will be conducted along workshop principles with formal lectures and interactive worked examples. The emphasis in the programme will be on the explanation of all technical phenomena and providing answers to problems that are encountered in everyday industrial practice regarding the operation and maintenance of screw compressors and dry gas seals.
Each learning point will be reinforced with practical examples. There will be ample opportunities for active discussion and sharing professional experiences and exchange that will help solidify the gained knowledge. All programme materials will be provided
TRAINING SUMMARY
PROGRAMME SUMMARY
This programme will provide an insight into the design and operating characteristics of screw compressors. Explained will be the important concepts related to cooling and lubrication issues as well as the capacity control. Vibration analysis and bearing degradation will also be discussed.
Focus in the programme will be on practical aspects of operation and problem solving of screw compressor system as a whole. The best practices for troubleshooting and vibration monitoring will be discussed. The programme will also introduce the delegates to the technical characteristics of dry gas seals and their application for various gas compressors.
ACCREDITATION
EuroMaTech is registered with the National Association of State Boards of Accountancy (NASBA) as a sponsor of continuing professional education on the National Registry of CPE Sponsors. State boards of accountancy have final authority on the acceptance of individual courses for CPE credit. Complaints regarding registered sponsors may be submitted to the National Registry of CPE Sponsors through its website: www.NASBARegistry.org.
Euromatech is a Knowledge & Human Development Authority (KHDA) approved training institute in Dubai, licensed and approved to deliver training courses in the UAE.
The KHDA is the regulatory authority in the UAE, that oversees administering, approving, supervising, and controlling the activities of various education providers in the UAE. We are proud of our commitment to ensuring quality training courses and status as a KHDA-approved training provider.
FAQ
Do you provide assistance with hotel accommodation?
Yes, we can assist you with the following:
- Corporate Discount: If available, we can extend our corporate discount for your stay at selected hotels.
- Hotel Suggestions: We can provide recommendations for nearby hotels based on your preferences and budget.
Feel free to explore online booking platforms for the most cost-effective options.
Do you offer customized training for organizations?
Yes, we provide tailored training solutions designed to meet the specific needs of your organization. Customized courses can be delivered either in-person or online, and you can select the dates and duration that best fit your schedule. For more details, please contact us at [email protected]
What types of training formats do you offer?
We provide two flexible training formats to suit your preferences:
- Classroom Training: Experience in-person learning with expert instructors. Engage in interactive discussions, hands-on activities, and benefit from face-to-face networking.
- Online Training: Join live online sessions from anywhere, offering flexibility for those with busy schedules or who prefer remote learning.
- In-House Training: We can bring our training directly to your organization, allowing for tailored sessions that address your specific needs and objectives.
Can you assist with visa arrangements?
Yes, we can help by issuing an official Letter of Invitation once you’ve confirmed your training registration, which can assist in your visa application process.
Who will be the senior consultant leading the training?
We are happy to share the profiles of our expert instructors. To learn more about their qualifications and experience, please contact us [email protected]
